TPOW pump adopts excellent self-balancing axial force and energy force hydraulic model at home and abroad, with stable performance, high efficiency, compact structure, small vibration, high pressure resistance of pump body, easy installation and maintenance.
Main uses
TPOW series products are widely used in water works, irrigation, drainage pump stations, power stations, air conditioning circulating water, industrial water supply system, fire protection system, shipbuilding industry, and oil refining industry for general purposes.
Scope of performance
Pump outlet diameter: DN80-800mm
Pump flow range: QW11600MVH
Pump head range: HW200M
Pump working pressure: PW2.5Mpa
Pump operating temperature: TW105C
Pump working voltage: U=380V, 6KV, 10KV
Hydraulic performance
The hydraulic design and structural design of the pump are carried out by using computer aided software (i.e. optimization design and reliability design method), which makes the TPOW double suction pump have high efficient and significant anti-cavitation performance.Compared with the domestic similar products, the efficiency of this series of products is 2-4 percent higher.At the same time cavitation performance is also significantly improved, which will save a lot of money for users.
Structural characteristics
1) Compact structure, small footprint, large axial size compression.
2) Small vibration, low noise, mainly take the following measures to reduce vibration and noise:
A. The pump housing adopts double volute structure:
B. Short axial size and good rigidity of rotor components:
C. Pump shaft is supported by imported high precision bearings.
Working Conditions
The highest working pressure of the TPOW volute double suction pump system is 2.5MPa, that is, the pump suction inlet pressure pump head is less than 2.5MPa, and the static pressure test pressure of the pump is 3.75MPa.
According to the maximum pressure of the pump body, the pump body and the pump cover are made of gray cast iron (1.6Mpa), ductile cast iron (2.0Mpa) and cast steel (2.5Mpa). Please indicate the pressure or material of the pump when ordering.
This series of pump transport temperature T≤105℃ of clear water or physical and chemical properties similar to clear water than it liquid.
